Why Waterproofing Required:-

Waterproofing is not only for Water Leakage in your building it is also for your Building/Structure’s protection, it will the life of your structure.

General Guideline for Do Right Waterproofing.

When selecting a waterproofing system, conservatism is the watchword. If leaks appear after the building is completed, the cost of excavation for repairs — even minor repairs — typically far exceeds the initial cost of the waterproofing system. Remember, as a designer you only have one chance to do it right. Research and due diligence are required to ensure that the right system is specified and all waterproofing issues are properly addressed. Site-specific issues and building requirements also necessitate proper consideration.

Waterproofing is the formation of an impervious barrier that is designed to prevent water from entering or exiting from various sections of the building structure. The waterproofing system is a series of integral components that function in unison to prevent moisture intrusion into the facility. The system configuration is generally similar in all waterproofing applications. The material components that are common to all types of waterproofing applications are the structural substrate, flashing, membrane, and insulation.

Types of Waterproofing,

Polymer Coating.

The polymer coating is basic waterproofing system. In this coating we used materials are LATEX, SBR( Styrene Butadiene Rubber). It is mixture of SBR and Cement. These systems are applied on small areas like Small Balcony, Chajjas, Bathroom and other surfaces where intensity of water low.

Acrylic Polymer Cementitious coatings.

These types of coating are 2 components pre-packed, pre-weighted by material manufactured. There are many types of materials are used High-Polymer Coatings, Anti root Coatings, etc.

This system is generally used in Wet areas, Bathrooms, Washing, Balconies, Podium Garden, Terrace, Terrace Garden, Flowerbed,  Waterbodys, Swimming Pool, Fountains, Retaining Wall, etc.

Acrylic Coatings

This system is exterior coating, can apply open to sky because it has UV stability. And it also gives Heat reflection. These materials can apply on Tiles and other glossy surfaces. No Need to remove tiles or China mosaic.

Pitch Modified PU (Polyurethane) Coatings.

This system is elastomeric high elongation exterior coating, can apply open to sky and under layer also, it has UV stability. And it also gives Heat reflection. These materials can apply on Tiles and other non-pours surfaces. Crack breathing Capacity up to 2 mm.

Pure PU (Polyurethane) Coatings.

Highly elastomeric, High-solid advanced system of liquid membrane.

Elongation more than 900%

Crack breathing capacity more than 2mm.

APP Membranes Waterproofing.

Bitumen based elastomeric membrane

2 – 4mm thickness range.

Various range of top finish Mineral, Sand and Plain finish.

SBS Membranes Waterproofing.

Self Adhesive.

Extraordinary bonding to the base surface.

Aluminium and Silver Top finish.

Suitable for GI Sheet Shed.

PVC/TPO Membranes Waterproofing.

Poly Urea Waterproofing Coatings.

High-end products for Basement and Roof Waterproofing membrane for large area.
Injection Grouting.